BGPZS - STAY CLEAN SOLDERING FLUXES
- MSDS: BGPZS
- Manufacturer: J W HARRIS CO INC
- Product Name: STAY CLEAN SOLDERING FLUXES
- National Stock Number: 3439-01-184-3189
Product Identification
Product ID:STAY CLEAN SOLDERING FLUXES
MSDS Date:11/01/1985
FSC:3439
NIIN:01-184-3189
MSDS Number: BGPZS
Responsible Party
CINCINNATI, OH 45242
US
Emergency Phone: 513-891-2000/800-424-9300(CHEMTREC)
Info Phone: 513-891-2000
Cage: 27911
Contractor
Telephone: 513-891-2000
Cage: 27911
Ingredients
ZINC CHLORIDE (SARA III)
CAS: 7646-85-7
RTECS: ZH1400000
Fraction By Weight: >20%
OSHA PEL 1 MG/M3/2 STEL
ACGIH TLV: 1 MG/M3/2STEL FUME93
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)
CAS: 7647-01-0
RTECS: MW4025000
Fraction By Weight: >10%
OSHA PEL C 5 PPM
ACGIH TLV: C 5 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
AMMONIUM CHLORIDE (SARA III)
CAS: 12125-02-9
RTECS: BP4550000
Fraction By Weight: >5%
OSHA PEL 10 MG/M3/20 STEL
ACGIH TLV: 10 MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: >40%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-WHEN HEATED DURING
SOLDERING,FUMES GENERATED MAY IRRITATE THE RESPIRATORY TRACT.THE
FLUX MAY IRRITATE THE SKIN.EYE CONTACT WILL CAUSE INTENSE
IRRITATION AND MAY INJURE EYE TISSUE IF NOT PROMPTLY
REMOVED.CHRONIC-NOT GIVEN.
Effects of Overexposure:EYES/SKIN/INHALATION:IRRITATION
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES,INCLUDING UNDER
THE EYELIDS.SKIN:FLUSH WITH WATER.INHALATION:REMOVE TO FRESH
AIR.INGESTION:GIVE PLENTY OF WATER OR MILK.DO NOT INDUCE
VOMITING.CALL PHYSICI AN IMMEDIATELY.
Fire Fighting
Flash Point:NON-FLAMMABLE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:ZINC CHLORIDE, ZINC OXIDE FUMES AND
HYDROGEN CHLORIDE.
Accidental Release
Spill Release Procedures:NEUTRALIZE WITH SODIUM CARBONATE OR TRI-SODIUM
PHOSPHATE.
Neutralizing Agent:WEAK BASE.
Handling
Handling and Storage Precautions:STORAGE-STORE IN A COOL PLACE.KEEP
CONTAINER CLOSED.
Other Precautions:USE WITH GOOD VENTILATION. WASH HANDS AFTER USING.
Exposure Controls
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN BRAZING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:LOCAL
Protective Gloves:WELDING GLOVES
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:EYE WASH AND SHOWER.WEAR HEAD AND BODY
PROTECTION WHICH HELP TO PREVENT INJURY FROM SPLASHING,SPARKS, OR
FLAME.
Work Hygienic Practices:WASH HANDS BEFORE EATING.
Supplemental Safety and Health
Chemical Properties
HCC:C3
pH:2.0-3
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR,COLORLESS LIQUID WITH AN "ACIDIC" ODOR
Stability
Stability Indicator/Materials to Avoid:YES
CYANIDE (WITH ZINC CHLORIDE GIVES HCN), SULFIDE + HCL MAY GIVE H2S.
Stability Condition to Avoid:HIGH TEMPERATURES AND FLAMES
Hazardous Decomposition Products:ZINC OXIDE AND ZINC CHLORIDE FUMES
Disposal
Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.